Screen Configurator
Design your screen, panel by panel
Choose your screen size, filter by material and design, then tell us the layout and dimensions. We work out the panels, the posts and the rails, with a clear parts list and total.
STEP of
What are you building?
Helps us understand your project. Every design is available whatever you choose here.
This answer is context only. It helps us understand the project, and every design, size and material stays available whatever you pick.
STEP of
Choose screen sizes
All 3 screen sizes shown. The design step will filter to this size by default.
Each screen sits between two posts, and each post adds 60mm to the run. Every run is rounded up to a whole number of panels, so the plan is build-ready.
STEP of
Choose a design
Only designs made in the screen size you picked are shown. Pick as many as you like, and the panel count gets split across them at the end.
STEP of
Your run length
Screens come in fixed panel widths, so we round each run to the nearest whole panel and show the achievable length.
Each run is rounded up to a whole number of panels, so the buildable length comes out close to what you enter rather than exact.
STEP of
How are you installing?
Concrete and hard-surface posts both include the base plate; the option sets the post length. Wall mount fixes the panels straight to a wall using bracket kits instead of posts.
Concrete posts set into the ground, hard-surface posts bolt down onto an existing slab or deck. Wall mount skips the posts and fixes the panels straight to a wall.
STEP of
Add gates (optional)
Gate kits are only available as WPC 900 × 1800mm screens in Fantail, Fern, Tui, Flax and Louvre. Each gate leaf is 900mm wide and takes the place of screen panels in your run. Gate hardware is listed separately.
Gate choices use WPC 900 × 1800mm gate screens. Leave the gate quantity at 0 if no gate is needed. Each gate leaf is 900mm wide and takes the place of screen panels in your run. The gate hardware kit is a separate item, sold on its own.
Filter by material
Number of gates
Leave the gate quantity at 0 if no gate is needed.
Gate screen
Your project summary
Adjust and recalculate, no need to start over
Your panels plan
Here’s a list of products with the estimated screen panel quantities for your project.
Your total panels required
The screen panel quantities below must add up to this number.
Screen panel
Gate leaf
Each gate replaces about 1 screen panel and shares the run’s posts
Gate hardware kit
Sold separately, one per gate
Wall mount pack
Top & Bottom rail kit
One per panel, sized to screen
Post Kit
Run length
These parts are limited by screen size: the run is built from whole panels, so the buildable length is close to what you entered but rounded up to the nearest panel.
